TRIAFIRE H is a Horizontal Automatic Fire Curtain that in the case of fire, limits and controls the fire, with classification EW 60.

The curtain is composed of fibreglass fabric with polyurethane coating on both sides seamed with reinforced steel wire and fixed to two steel rollers of 78 mm in diameter. Galvanized steel elements such as headbox, side guides and bottom bar.

The entire system is driven at least by two 24 V tubular motors, on opposite sides. The control panel for automatic curtains (CBM), has a nominal input voltage of 115 V or 220 V and an output voltage of 24 V. Uninterruptible Power Supply (UPS System) with an autonomy of up to 6 hours available in all control panels.

Tested in accordance with EN 1634-1 and classified in accordance with EN 13501-2.

The system can be activated by a SHEV, fire alarm contact, internal fire and smoke detection devices, or manual emergency buttons. In the event of a fire, the Control Panel (CBM), receives the signal alarm, and the automatic curtain deploys automatically, at a constant speed. If there is a false alarm the curtains return to the stand-by position automatically after resetting the alarm from the main Fire Management System. In case of main power loss, the curtain will remain fully retracted thanks to the battery backup system.

The fibreglass fabric resists up to 1100ºC. The polyurethane coating on both sides guarantees mechanical stability when handling the fabric not only in the sewing process but also during the installation. All seams are done with reinforced stainless steel wires with a coating of Kevlar.